{"product_id":"link-g4x-monsoonx-wire-in-bundle-with-loom-can-lambda-and-iat-sensor-127-9300b","title":"Link G4X MonsoonX Wire-In Bundle with Loom, CAN Lambda and IAT Sensor (127-9300B)","description":"\u003cp\u003eThis bundle packages the G4X MonsoonX with a 2.5 m A loom, a CAN Lambda wideband controller with a Bosch LSU 4.9 sensor and an intake air temperature sensor. The MonsoonX has its own built-in MAP sensor, so no separate MAP sensor is part of the bundle, and the CAN Lambda supplies live lambda without using up inputs. It suits naturally aspirated and turbocharged engines up to four cylinders or two rotors that want some advanced functions such as VVT, closed-loop boost, launch control or anti-lag, keeping in mind that the limited I\/O means not every feature can run at once.\u003c\/p\u003e\u003ch3\u003eIn the bundle\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eG4X MonsoonX wire-in ECU (127-4000), with its USB tuning cable, mounting bracket and quick start guide\u003c\/li\u003e\n\u003cli\u003e2LA A loom, 2.5 m\u003c\/li\u003e\n\u003cli\u003eCAN Lambda wideband controller with a Bosch LSU 4.9 sensor\u003c\/li\u003e\n\u003cli\u003eIntake air temperature (IAT) sensor with a 1\/8\" NPT thread\u003c\/li\u003e\n\u003cli\u003eDeutsch DTM connector kit with each sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in MAP sensor in the ECU\u003c\/li\u003e\n\u003cli\u003eThe CAN Lambda gives fast, accurate live lambda without using up any digital or analogue voltage inputs on the ECU\u003c\/li\u003e\n\u003cli\u003eVVT control, open- and closed-loop boost control and dual closed-loop lambda\u003c\/li\u003e\n\u003cli\u003eLaunch control, anti-lag, gear shift and paddle shift control, as I\/O allows\u003c\/li\u003e\n\u003cli\u003eFlex fuel, flexible engine protection limiters, a built-in trigger oscilloscope and 8 custom math blocks\u003c\/li\u003e\n\u003cli\u003eCAN bus with CAN keypad control and CAN or serial data for aftermarket dashes\u003c\/li\u003e\n\u003cli\u003e512MB of onboard data logging\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine support:\u003c\/strong\u003e up to 4 cylinders or 2 rotors, sequential injection and direct spark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eECU outputs:\u003c\/strong\u003e 4 injection, 4 ignition, 6 auxiliary (spare ignition drives can be used as auxiliary outputs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eECU inputs:\u003c\/strong\u003e 4 digital, 2 temperature, 4 analogue, 2 trigger, 1 knock (the knock input shares a pin with digital input 4)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAP sensor:\u003c\/strong\u003e built into the ECU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-throttle:\u003c\/strong\u003e not supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWideband lambda:\u003c\/strong\u003e external CAN Lambda controller with a Bosch LSU 4.9 sensor, included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications:\u003c\/strong\u003e 1 CAN bus, Mini-B USB tuning port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData logging:\u003c\/strong\u003e 512MB, up to 100kHz total logging rate, 250 channels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eECU connector:\u003c\/strong\u003e one 34-position Superseal (takes Link's A loom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eECU enclosure:\u003c\/strong\u003e glass-filled nylon, 95 x 130 x 45 mm (3.74 x 5.12 x 1.77 in), 220 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eECU electrical:\u003c\/strong\u003e 6.5 to 24V operating range, 36V maximum input, 3A maximum continuous draw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoom:\u003c\/strong\u003e 2LA A loom, 2.5 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIAT sensor:\u003c\/strong\u003e intake air temperature sensor with a 1\/8\" NPT thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor connectors:\u003c\/strong\u003e each sensor comes with its Deutsch DTM connector kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware:\u003c\/strong\u003e PCLink, a free download from Link\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":67887435448565,"sku":"127-9300B","price":2716.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0807\/8832\/4597\/files\/127-9300B.0.jpg?v=1793325994","url":"https:\/\/evolutionplusperformance.ca\/fr\/products\/link-g4x-monsoonx-wire-in-bundle-with-loom-can-lambda-and-iat-sensor-127-9300b","provider":"Evolution Plus Performance","version":"1.0","type":"link"}